Ventilated Facades

Bond Plating

A practical way, increasingly present in the urban environment, is the definition of "modern personality" of a new or renovated building, through ample facades, plated with composite materials. The major advantage of such a façade results from the incovering of lightweight materials that do not require the structure of building resistance, durable and easy to maintain.

There are various variants of the production of a ventilated façade, but for functional and especially aesthetic considerations, the Confelux company promotes facade platings from bond-type aluminum composites. The advantages of this type of material are numerous:

modern and impressive appearance Ease of processing the material may be debited, curved and bent to achieve the desired shape and sizehigh rigidity on the surface unit in conditions of extremely low weightIncreased resistance to aggression of environmental factors (rain, ultraviolet radiation, noxious)Fire-approved resistance according to current requirementsEasy to maintain, not allowing impurities to impregeneze in materialIt is achievable in a palette of vast colors Aesthetics and physical properties remain unchanged in time

Essentially the material consists of a composite panel made of two outer layers of aluminium with a standard thickness of 0.5 mm united through a high density polyethylene core. The thickness of the resulting sandwich can be 3.4 or 6 millimetres, depending on the specific needs.

Finished product – the box – is obtained by three-dimensional processing of bond sheets. The tapes combine on the façade in a particular grid defined by the architectural project. The tapes are rigid, and the sandwich effect ensures the damping of vibrations and nedeformarea in the An investor of high wind loads. The visible part is covered by a multilayer dyeing process that guarantees excellent time resistance.

Confelux is able to offer design services execution and installation of cassettes with materials from the most renowned producers in the field: Alucobond, Etalbond, Jbond and Reynobond. The choice of one of the brands depends on the customer's preferences with the mention that each manufacturer has its own color range, and some offer special products for exterior plating – Alucobond, Etalbond, Jbond and Reynobond, or for interior plating- Etal light or Dibond).

Ceramic Plating

The new ecological systems of ventilated facades of ceramic materials are mounted dry, catching them with support systems and fastening systems from aluminum profiles.

The ventilated ceramic façade system consists of mounting dry on a substructure set on the façade of buildings, special aluminum mounting profiles that form the bearing structure of burnt clay plywood.

Between the structural element of the construction and the ceramic tiles is introduced a termoizolator layer of mineral wool, dimensioned according to the climatic zone in which the construction is located. The ventilated facades of ceramics are only façade systems made of raw natural materials combining advanced technology with unique ceramic characteristics.

The pleasant and natural appearance given by the ceramics and the flexibility of the usage variants make the ceramic façade systems the ideal solution for combining with ease the tradition and avangardismului in construction. In combination with steel, glass or wood, these facades refine modern constructions and give a note to the comtemporaneitate of renovated buildings.

For both new and renovated caldirile, ceramic façade panels are ideal due to the main qualities:

Energy EfficientDon't freezeAre fireproofRetains its shapeSide joint profiles prevent lateral movement of plaquesThe combination mode prevents rain water infiltration and wind noiseExact dimensions following the special process of factory calibration

The distinguished appearance of ceramic façade systems remains unchanged in the long term. An ingenious drainage system prevents contamination. The colors of the ceramics are durable and remain intense and after being exposed to atmospheric factors.

HPL Plating

TRESPA is a full plywood made of thermoresistant resin reinforced with wood fibers, manufactured in conditions of pressure and high temperature. Through advanced and patented technology worldwide (EBC), electronic bombardment, the decorative surfaces are obtained in plywood.

TRESPA is used for cladding of facades, intradosurilor, balconies, aticelor as well as for street furniture, sandwich panels, in general or special outdoor applications.

TRESPA is extremely weather resistant. The sun, rain, including acid rain, moisture will not affect the surface or core of the plywood. Resistance to ultraviolet radiation and color stability are very high corresponding on the International Grey Scale (ISO 105A02) steps 4 – 5. The wide or fast variations in temperature from-20 to + 80 degrees Celsius will not affect the properties, stability or appearance of the plywood. The colours will not have visible changes for at least 10 years even in severe climatic conditions or in highly polluted industrial environments.

Non-porous plywood surfaces do not allow adhesion of impurities. surfaces or plywood tiles do not require protective coverings. TRESPA is unaffected by household cleaning agents or strong organic solvents. High elasticity, tensile strength and compression guarantee a very high impact resistance. The homogeneity and density of the core gives the plywood TRESPA a high resistance to the avulsion in the areas of application of the fastening elements. This aspect is particularly important when the plywood is fastened dorsally with screws or minidibluri. The stability and machinability properties of TRESPA plywood are comparable to hardwoods but without being affected by moisture, degraded by weather and mould or rotting.

Zement Beschichtung

Fibrocement-ventilated façade materials provide unrivalled design flexibility. Fibrocimentul has an authentic color, which means that the surface shows the texture and the intrinsic color of the inside material. Whatever design options you want to explore, these materials of authentic fibrocimentului can be transformed into clear detail and a monolithic look. Fibrocimentul are manufactured in panels of up to 3.10 m x 1.25 m and can be transformed into any size or shape, using standard equipment in both the workshop and the site. The material can be perforated and etched. It was used by designers for interior furnishings or furniture. By their authentic color, Fibrocimentul allows you to obtain high accuracy details.